Analyze

Measured Sound and Pacing: Loudness, Peaks, Quiet Stretches

Find quiet sound, distorted audio, background noise and dead air in your short-form video, each with the exact time to fix it.

LiveAll plans

What measured sound and pacing shows you

For a video you upload, Retensis reads the sound and the picture from the file itself and shows what it found beside your scores, in a card labelled Measured. These are facts about your file, not estimates: the same video always gives the same numbers.

Each line says what was found, why a viewer would notice it, and, where it matters, the exact moments you can tap to jump straight there. It appears on analyses of uploaded videos from November 21, 2026 on. A video analyzed from a YouTube link is not measured, because Retensis never holds that file.

What each line means

LineWhat it tells youWhat to do
LoudnessHow loud your video plays overall. Too quiet and people have to turn it up or scroll on; too loud and it can sound harsh.If it reads quieter than most, raise the voice in your editor or record closer to the mic. If louder than most, bring it down so it does not sound harsh.
PeaksYour video's loudest moments. When they hit the very top, the sound can crackle or distort on phone speakers.Lower the loudest moments a little, or record further from the mic for shouts and laughs.
BackgroundHow clearly your voice or music stands out from everything underneath it. The bigger the gap, the easier it is to follow.Turn the music down under your voice, or record somewhere quieter.
NoiseHow much hiss, wind or hum is in your sound. Cleaner sound is easier to listen to.Record away from fans, wind and traffic, or use a noise reduction step in your editor.
Quiet stretchesMoments of 1 second or more where the sound drops away. In a short video, silence can be the moment people scroll on.Tap a time to hear it, then cut the stretches that are not doing a job.
Held pictureMoments where the picture stays the same. That can be on purpose, like a photo you talk over; it just shows where nothing on screen moves.Keep it if it is on purpose; add movement, text or a cut if nothing is happening on screen.

How to use it before you post

  1. 1

    Open the analysis

    The Measured sound and pacing card sits on the Overview, beside your scores.

  2. 2

    Read the highlighted lines

    A line that needs attention is shown brighter than the rest. A line in the usual range needs nothing.

  3. 3

    Tap a time

    The video jumps to that moment, so you can hear the distortion or the dead air for yourself.

  4. 4

    Fix it in your editor

    Use the "What to do" column above, or the Fix First list in the same analysis for the change with the biggest impact.

  5. 5

    Analyze the new version

    Upload the edited video and its card shows the new measurements.

What "most short-form videos we measure" means

Loudness, background and noise are compared with short-form videos Retensis has measured itself: 293 uploads, measured on November 21, 2026. They are our own measurements, not a platform's rule.

What that study found: the typical short-form video with sound plays at about -16.4 LUFS (the standard unit for loudness), about 1 in 4 videos with sound reach the top of the range at their loudest moments, and about 1 in 15 has a quiet stretch of a second or more.

What it does not do

  • It does not change your scores. The measurements sit beside them as facts.
  • It does not judge your style. A held picture can be on purpose, like a photo you talk over, so it is shown, never marked as a problem.
  • It does not measure videos analyzed from a YouTube link.
  • It does not promise views. It shows what a viewer would hear and see, so you can decide what to change.

Related documentation