Guide6 min read

Podcast Loudness Standards: What -16 LUFS Means

What loudness Apple Podcasts recommends, what Spotify's own spec page says, and how to check your episode against -16 LUFS.

By Retensis Team

What Apple Podcasts Recommends

Apple Podcasts publishes the clearest loudness target for podcasts, on its audio requirements page. In its own words: "we recommend that the audio signals are preconditioned so the overall loudness remains around -16 dB LKFS, with a +/- 1 dB tolerance."

LKFS and LUFS are the same unit. So in everyday terms, Apple asks for an episode that sits around -16 LUFS. Anything from -17 to -15 is inside its tolerance.

This is integrated loudness: the loudness of the whole episode, from start to end. It is not the loudest moment, and it is not the volume slider in your editor.

The Peak Ceiling

The same page sets a ceiling for peaks. Apple asks that "the true-peak value doesn't exceed -1 dB FS".

Listening apps compress your file before it reaches a listener. Apple explains that a peak above the ceiling can clip during that step. A clipped peak sounds harsh, and it cannot be fixed later.

So the two readings work together. Loudness says how loud the episode feels overall. True peak says whether its loudest moments leave enough room.

What Spotify's Spec Page Says

Spotify's creator help includes a podcast specification page. We read it on 2026-11-16. Spotify's podcast specification page for creators publishes no loudness figure for podcast episodes.

Other figures are often quoted for Spotify, but they do not come from that page. For a podcast, Apple's published recommendation is the one to work to.

ReadingApple Podcasts recommends
LoudnessAround -16 LUFS, give or take 1
True peakAt or below -1 dB FS

Why Loudness Matters to Listeners

A listener sets the volume once and expects it to hold. A quiet episode makes them reach for the volume. A loud one makes them reach for it the other way.

Either reach is a moment where they might stop instead. Steady loudness removes that moment, episode after episode.

Loudness also shapes how your voices sit together. One voice much quieter than the other is tiring to follow. That is worth checking along with the overall level.

How to Check Your Episode

Most editing apps include a loudness meter or a normalize option that targets LUFS. Measure the finished, exported file, not the project. The export is what listeners hear.

Podcast Analysis does this for you on an uploaded episode. It states the loudness and the peaks against Apple's recommendation, in plain words. It also compares each voice's volume with the others. It is on Growth and above.

For a full review of an episode, read how to get honest feedback on your podcast.

Frequently asked questions

Apple Podcasts publishes the clearest target for podcasts. Apple Podcasts recommends an overall loudness of around -16 LKFS, the same unit as LUFS, with a tolerance of 1 dB either way. An episode inside that range is on target for Apple's recommendation.

Yes. LKFS and LUFS are two names for the same loudness measurement. Apple's page says LKFS, and most audio tools say LUFS. A reading in one is a reading in the other.

Not on its creator spec page. Spotify's podcast specification page for creators publishes no loudness figure for podcast episodes. Figures quoted for Spotify elsewhere do not come from that page, so Apple's published recommendation is the clearer one to work to.

True peak is the loudest point of the sound wave, including the moments between samples. Apple Podcasts recommends that an episode's true peak stays at or below -1 dB FS. Apple explains that a peak above it can clip when the file is encoded for listening apps.

Know what to cut, fix and clip before your episode goes out

Upload an episode or paste its YouTube link. Podcast Analysis grades it, shows where listeners may leave, and plans the edit. It is on Growth and above.

Analyze an episode →